Blink Camera Not Working (Here’s How to Fix It)

Hello, it appears that you are experiencing problems with your Blink security system. Fear not, it occurs to the best of us. Although technology can be tricky at times, there are a few simple fixes you can try to get your Blink cameras operating correctly once more.

Unlock the seamless entertainment experience by fixing “Blink Camera Not Working”. Take a deep breath, follow our step-by-step troubleshooting guide, and work through some common issues that can cause Blink cameras to malfunction before giving up and buying a whole new camera setup.

With a little perseverance and some easy fixes, your Blink cameras will be back online and monitoring your home in no time.

Common Reasons Behind Blink Camera not Working

Common Reasons Behind Blink Camera not Working

Your Blink camera could not be working properly for a few frequent reasons. Let’s review some of the potential problems and solutions.

Power source problems

First, make sure your Blink camera is powered on if it isn’t reacting or turning on. Verify that the camera is charged and connected in.

If it hasn’t been used for a time, the battery might have run entirely out of juice. Give it enough time to fully recharge, and it ought to start operating once more.

Connectivity issues

Blink cameras connect to your wifi network to function. Double check that your wifi router is working properly and the network name (SSID) and password are correct in the Blink app.

It’s possible the camera has disconnected from the wifi. You may need to power cycle the camera to reconnect it.

Outdated firmware

If your Blink camera is having trouble connecting or behaving erratically, the firmware may need an update.

Open the Blink app on your phone and check for any available updates for your camera model. Install the latest version which often contains security patches and connectivity fixes.

Camera placement

The location and positioning of your Blink camera can sometimes cause connectivity or detection issues. Make sure the camera has a clear line of sight to the area you want to monitor. Check that the camera is angled properly and not obstructed by trees, buildings or other objects in the field of view. Relocating the camera a few feet in any direction may significantly improve its performance.

App problems

In rare cases, the issue could be with the Blink app and not the camera itself. Try force closing the Blink app and reopening it. You may also want to uninstall the app then download the latest version from the app store and sign in again. This can refresh the connection between the app and your cameras.

If after trying the steps above, your Blink camera is still not functioning properly, it’s best to contact Blink support for further help. They may need to troubleshoot or replace the camera if there are any hardware malfunctions or defects preventing it from working.

Checking the Camera’s WiFi Connection

If your Blink camera isn’t connecting or streaming live footage, the issue could be with its WiFi connection. Here are some things to check:

Checking the Camera’s WiFi Connection

Blink Camera Not Working
Step-by-step guide on checking the Blink Camera’s WiFi connection to address Blink Camera Not Working issues. Stay connected for reliable security!
  1. First, confirm that your WiFi network and Blink camera are still linked. To access the camera, open the Blink app on your phone and choose it from the list.
  2. Your camera’s WiFi connection has been lost if you receive a “Camera Offline” notification.
  3. Verify that your internet connection is operational and that your WiFi network is functioning properly.
  4. Should everything appear to be in order, you might need to reset your camera in order to get the WiFi connection again.
  5. Find the little reset button on your Blink camera’s side or back. Once the LED indication starts to flash or you hear a beep, press and hold the reset button for ten to fifteen seconds.
  6. Let go of the button and give your camera two minutes to restart and establish a WiFi connection.
  7. Check whether your camera’s live view loads correctly by opening the Blink app once more. If not, you’ll have to reconfigure your camera via the Blink app in order to join it to your WiFi network.
  8. To connect your camera to WiFi, select “Add New Camera” in the Blink app and follow the onscreen instructions.
  9. To enable the camera to connect to the network, you will need to provide the name and password of your WiFi network.
  10. You ought to be able to see live video and get motion alerts as usual as soon as your Blink camera connects to WiFi again and appears as “Online” in the Blink app.
  11. For optimal connectivity, make sure your WiFi range reaches the locations of your Blink cameras.

Rebooting your WiFi router and thoroughly inspecting for potential signal interference that can interfere with the connection between your Blink cameras and WiFi network are necessary if issues continue.

If the preceding solutions don’t resolve your camera’s connectivity problems, get in touch with Blink Support.

Syncing Issues With the Blink App

Syncing your Blink cameras to the mobile app is crucial for viewing live footage, reviewing video clips, and ensuring your system is up to date. If you’re having issues syncing your cameras, here are some things to try:

Check Your Wi-Fi Signal

For syncing to work properly, your Blink cameras need a strong Wi-Fi connection. Walk over to each camera and check that you have at least two bars of signal strength showing on the camera.

If not, you may need to move the cameras closer to your router or install a Wi-Fi range extender.

Update the Blink App and Firmware

One of the most prevalent causes of synchronizing issues is outdated software. Go to the upper left corner of the Blink app on your phone and tap the menu (three horizontal lines).

In order to update the app, select “Check for Updates.” After that, select “Firmware Updates” to install the most recent firmware on your cameras.

Re-Sync Your Cameras

You’ll need to re-sync your cameras to the Blink system if upgrading is ineffective.

  1. Tap the menu and choose “Camera Management” from the Blink app.
  2. Select “Remove Camera” after tapping on a problematic camera to remove it from your system.
  3. After that, unplug the camera for 30 seconds to perform a power cycle.
  4. You will receive an alert in the Blink app to add a new camera when you plug it back in.
  5. To sync the camera, follow the instructions, which can involve clicking the camera’s sync button.
  6. Do this again for any other malfunctioning cameras.

Reset Your Blink Sync Module

Blink Camera Not Working
Learn how to reset your Blink Sync Module to fix Blink Camera Not Working problems. A step-by-step guide for a hassle-free security system!

Resetting your Blink Sync Module, which is what links your cameras to the app, might be your last resort.

  1. Take the Sync Module’s power plug out for a minute.
  2. Re-plug it in, then give it two minutes.
  3. Launch the Blink app, choose “Reset Sync Module” from the “Settings” menu.
  4. After verifying the reset, give it a few minutes.
  5. After that, your cameras need to reconnect to the module and function correctly once more.
  6. If problems persist, you might need to get in touch with Blink support for more assistance.

Troubleshooting Power and Battery Problems

If your Blink camera isn’t powering on or seems to have battery issues, here are some things you can try to get it working again.

Check the power cable and connection

First, make sure the camera and wall outlet are both properly plugged in with the power cable. Make sure the outlet is functioning properly by checking it again with another device, such as a lamp.

For a replacement, get in touch with Blink support if the cable appears to be damaged in any way.

Reset the camera

Small software bugs that prevent your Blink camera from turning on can frequently be fixed by resetting it.

  1. Find the tiny reset button, which resembles a tiny pinhole, on the side or rear of the camera.
  2. Holding down the reset button with a bent paperclip or pin, press and hold it for three to five seconds.
  3. After letting go of the button, give the camera a few minutes to completely restart.
  4. Your camera should be prepared to be set up again in the flash app once the light begins to flash blue.

Replace the backup battery

When the power goes out, your Blink camera that isn’t hooked for continuous power uses the internal backup battery. This rechargeable battery may eventually run out of power and stop working, even when the camera is plugged in. It is necessary to change the battery.

Blink offers authorized replacement batteries on their website, along with installation instructions tailored to your particular camera model. Before resetting the camera, make sure it has a full charge after inserting the new battery.

Still not working? It may need servicing.

It’s conceivable that there is an internal hardware or software problem with your Blink camera if none of the aforementioned fixes work to get it operating again. If this is the case, you should get in touch with Blink support for additional troubleshooting or possible warranty assistance.

If your camera is an older model that is no longer under warranty, they could need to replace or perform a firmware update. For the quickest fix to your camera problems, get in touch with Blink right away. They strive to provide prompt customer assistance.

How to Factory Reset Your Blink Camera

If your Blink camera not working properly, a factory reset may help get it functioning again. Here’s how to reset your Blink camera:

Step 1: Open the Blink app on your phone and tap the menu icon (three horizontal lines). Select “Camera Settings”.

Locate your camera and press the gear-shaped settings icon next to it. After swiping down, select “Factory Reset.”

Step 2: Tap “Reset” to confirm.

Your Blink camera will return to its original factory settings as a result. After that, it will restart your camera and remove all event clips, live view footage, and settings.

Step 3: Wait 2-3 minutes while your camera reboots.

Your camera’s status light will flash during this period. The reset of your camera is complete when it stops flashing.

Step 4: Re-add your camera in the Blink app.

Launch the Blink application, select “Add Existing Camera” by tapping the + sign. To set up your camera from scratch, simply follow the instructions and give it a name, location, and Wi-Fi network connection.

Step 5: Test your Blink camera to ensure it’s working properly.

To ensure that recording is operating as intended, open live view, arm your system to test motion detection, and watch any new event clips. Should problems continue, you might need to carry out more troubleshooting or get in touch with Blink support for more assistance.

To start over, a factory reset clears your Blink camera. Resetting the camera can resolve issues with motion detection, video streaming, and connectivity. Make sure your Blink camera is positioned in an ideal spot with a strong Wi-Fi signal if it still won’t work after being reset.

It is also important to confirm that the Blink app and the camera are up to date. With some patience and persistence, you’ll get your Blink security camera up and running again in no time.


Why is my Blink camera not working?

Your Blink camera may not be functioning due to a number of reasons, such as software bugs, power problems, or connectivity problems. For a thorough fix, refer to our troubleshooting guide.

What should I do if my Blink camera is not detecting motion?

In case your Blink camera isn’t picking up motion, be sure to examine the device’s settings, location, and battery life.

Our manual offers thorough instructions for resolving motion detection issues and improving camera functionality.

How can I fix the issue of my Blink camera showing a black screen?

Your Blink camera may have a blank screen due to a number of problems. Check out our troubleshooting guide to fix any possible hardware or software problems and get your camera working again.

My Blink camera is not connecting to the Wi-Fi. What should I do?

Issues with Wi-Fi access may impair the functionality of your Blink camera. For flawless camera functioning, find out how to fix Wi-Fi connection problems and guarantee a steady network connection.

What steps can I take if my Blink camera is not recording videos?

whether you are having trouble recording videos with your Blink camera, check whether there are any storage, settings, or power-related problems.

We provide step-by-step directions in our guide to assist you in fixing this issue so you may start recording videos again.

Why is my Blink camera’s LED indicator not working as expected?

Your Blink camera’s LED indicator is essential for displaying status information. If something isn’t working well, there can be a power or connectivity issue.

To address and resolve the LED indication issue, adhere to our troubleshooting procedures.


  • Here are a few simple troubleshooting steps to help you get your Blink camera back up and running.
  • When technology isn’t working well, it might be annoying, but you now know how to fix the majority of frequent problems.
  • Try these procedures first, and if your camera is still not working, it might be a hardware issue.
  • In that case, get in touch with Blink support. However, it’s likely that one of these easy solutions was the solution.
  • Return to monitoring and maintaining relationships with the people and things that are most important to you, your family, and your house. Continue observing, and have fun blinking!

Thanks For Reading Our Article On “Blink Camera Not Working”

Our Other Articles:

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top